With two set screws facing inside, fit one F-1 profile next to right panel. F-1 profile rests
against widest part of roof ridge and lines up with top of gutter.
Repeat step 8.2B through 8.2C to secure install and secure F-1 profile on left side.
From inside, hold profile in place
with one B-4 connector. Secure
with two bolts.
Hold two profiles together at ridge using one B-4 connector. Secure with two bolts.
R-1
F-1
W-1
G-1
F-1
G-1
W-1
Working from back right corner, remove plastic film from both sides of one
W-1 panel. With side marked “ UV Resistant” facing outside, fit top end of
panel into channel in R-1 roof ridge near corner. Push panel into roof
ridge channel until the other end rests on gutter ledge and then
slide towards F-7 corner profile.
Repeat to install W-1 panel
in back left corner.
8.3A
8.3B
8.3C
8.3D
8.3E
R-1
F-7
W-1
G-1
F-7
W-1
R-1
F-7
G-1
W-1
R-1
F-1
W-1
NOTE: VIEWS FROM OUTSIDE.
WWW.RSIWW.COM
34 of 46
NOTE: VIEWS FROM OUTSIDE.
NOTE: VIEWS FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
R-1
F-7
G-1
W-1
W-1
R-1
F-1
F-1
B-4
B-4
F-1
F-1
B-4
S-2C
6
3
Connector
QTY
W-1
2
Panel
QTY
24” x 57”
