4.6A
4.6B
4.6C
The gutters are secured together using B-5 connectors and attached to
side profiles using B-3 connectors on the outside of the greenhouse.
The B-3 connector uses the set screw in the center hole of B-5
connectors at seams. Loosen and slide set screws to line up
with connectors making sure the seams line up and the
gutters remain straight.
Loosen set screws on side profiles and slide down. Fit wide part of B-3 connector onto set
screw, slide up into place fitting gutter set screw at other end. Tighten set screws and
secure with bolts.
B-3
S-2C
42
11
Connector
QTY
B-5
5
Connector
QTY
B-3
B-3
B-5
F-7
G-1
G-2
F-1
W-1
W-1
B-5
B-5
Begin at the five seams and arrange set screws so middle screw is
centered. Fit B-5 connector onto gutter and hold in place
using the two end bolts.
NOTE: VIEWS FROM OUTSIDE UNDER GUTTER.
NOTE: VIEWS FROM OUTSIDE UNDER GUTTER.
20 of 46
WWW.RSIWW.COM
NOTE: The bottom of B-3 connector extends past the edges of side and
corner profiles. B-3 connector sits over B-5 connector. Secure all with bolts.
