5.5
Prepare one F-4 profile. Slide two set screws into bolt track
and position as shown.
Prepare one F-5 profile. Slide four set screws into bolt tracks and position as shown.
The door frame is 65¼” high from the base. To avoid adjusting the placement
after assembly, prepare door frame using the exact measurements
listed in these steps.
Place one end of F-4 profile against F-5 profile on flat level surface.
Center F-4 profile to F-5 profile and adjust set screws to fit B-2
connector. Secure with three bolts.
Turn profiles over and place on flat surface.
Slide two set screws into bolt tracks of F-4
and F-5 profiles. Repeat step 5.5C
to place and secure B-2 connector.
NOTE: The inside has two extra set
screws on the ends of F-5 profile.
F-4
F-5
F-5
5.5A
5.5B
5.5C
5.5D
IMPORTANT: F-4 profile is centered to F-5 profile and secured on both sides with B-2 connector.
F-4
F-4
F-5
F-4
F-5
F-4
F-5
B-2
B-2
22”
( 560mm)
22”
( 560mm)
F-4
F-5
B-2
24 of 46
WWW.RSIWW.COM
B-2
S-2C
6
2
Connector
QTY
Connector
QTY
S-2A
S-2B
10
10
QTY
Profile
F-5
F-4
1
1
20
½”
47
¼”
F-5