7.2A
7.2B
Use two people and a step ladder. Place step ladder inside greenhouse.
Have one person inside greenhouse supporting ridge as you slide it into
position. Avoid touching top of front and back of greenhouse until each
end is flush with ends of front and back profiles.
7.3A
7.3B
7.4B
Working from inside, secure roof ridge to front end wall. Loosen set screws and adjust position
to fit holes in B-7 connector. Secure with two bolts.
7.4A
Working from outside, ensure all pieces are still flush and secure roof ridge to front. Loosen set
screws and adjust position to fit holes in C-2 connector. Secure with three bolts.
Make sure end of roof ridge is
flush to profiles on front and back.
Repeat step 7.3A to secure back.
Repeat step 7.4A to secure back.
S-2C
4
Connector
QTY
B-7
2
S-2C
6
Connector
QTY
C-2
2
WARNING: Use two people to install roof ridge. Place ladder in
inside of greenhouse. One person will stand on the ladder holding
the ridge until it is in the proper position and secured in place.
C-2
NOTE: VIEWS FROM INSIDE.
NOTE: VIEWS FROM OUTSIDE.
B-7
F-7
F-7
R-1
R-1
R-1E
R-1E
R-1E
R-1
F-7
F-7
31 of 46
WWW.RSIWW.COM
