39 of 46
WWW.RSIWW.COM
Continue working from back to install section six. Remove
plastic film from both sides of one W-1 panel.
With side marked “ UV Resistant” facing
outside, install next panel at slight
angle on left. If necessary, loosen
the previous B-4 connector and
profile and move them towards
the back of the greenhouse to
make more room to fit
panel in place.
8.8A
8.8B
Remove plastic film from both sides of one W-2 panel. It will be
installed opposite the W-1 panel installed in 8.8A. From outside
position panel with extended ledge profile at outside top.
Install panel at slight angle sliding all the way into profile.
Fit other end into opposite profile. If necessary apply slight
pressure to bend panel and snap into place.
W-1
F-1
F-1
F-7
W-1
W-2
NOTE: VIEW FROM OUTSIDE.
W-2
4
Panel
QTY
24” x 32
¼”
W-1
1
Panel
QTY
24” x 57”
8.8C
Remove plastic film from both sides of second
W-2 panel and repeat step 8.8B to install in
fouth section from back right.
8.8D
Remove plastic film from both sides of second W-2 panel and
repeat step 8.8B to install in fifth section from front right.
8.8E
Remove plastic film from both sides of second W-2 panel and
repeat step 8.8B to install in second section from back left.
F-1
F-7
F-1
W-1
W-2
NOTE: VIEWS FROM OUTSIDE.
NOTE: VIEWS FROM OUTSIDE.
NOTE: VIEWS FROM OUTSIDE.
NOTE: VIEWS FROM OUTSIDE.
F-1
F-1
F-1
W-1
W-2
F-1
F-1
F-1
W-1
W-2
