Riso MH 9350 User Manual Download Page 92

Page: 92 / 218

Chapter 3 Functions for Master Making

Details of original data

Touch [Storage] in the [Functions]
tab screen.

Touch an original data item that
you want to check.

You can also select multiple original data items.

Touch [Details].

The [Storage Retrieve] screen is displayed.

Change the settings as necessary.

■

[Rotate]:

Touch this button to print with the original data
rotated 180 degrees.

■

[Copy/Move]:

Touch this button to display the [Copy/Move]
screen. You can copy or move the original data
between [Storage] and [USB Job List].

■

[Output]:

Touch this button to display the [Output]
screen. You can change the printing order
(ascending / descending) and limit the pages to
be printed (odd / even / specified pages).

■

[Preview]:

Touch this button to display the [Preview]
screen.
You can check the original data image.
(

83 “Checking the Original Data Image [Pre-

view]”)

Touch [Retrieve].

Touch [Retrieve] to print the original data.
Touch [Cancel] to immediately close the
screen.

Changing to the [USB Job List]
screen

You can switch between the [Storage Selection]
screen and the [USB Job List] screen alternately.

Touch [USB Job List] in the [Stor-
age Selection] screen.

The [USB Job List] screen is displayed.

When you touch [Storage] in the
[USB Job List] screen, the [Storage
Selection] screen is displayed.

Summary of Contents for MH 9350



























































































































































































































Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands

Riso MH 9350, User Manual

Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands