Riso MH 9350 User Manual Download

Page: 201 / 218

Chapter 11 Troubleshooting

199

Papers are not smoothly fed
from the paper feed tray.
(Papers are skipped, or mul-
tiple sheets are fed)

Check if appropriate papers
are used.

Use papers that are suitable for this machine.
(

15 “Printing papers”)

Check if the position of the
paper feed setting lever is
appropriate.

When using thick or slippery papers, switch the
paper feed setting lever to the position of [CARD].
(

30 “Setting up the paper feed tray and the

paper”)

Check if the angle of the
stripper plate is appropriate.

Turn the adjustment dial for the stripper plate angle
to adjust the angle of the stripper plate in accor-
dance with the paper conditions.

Before the adjustment, be sure to
remove any papers from the paper feed
tray, and then confirm that the paper
feed tray has lowered to the bottom.

■

When papers are skipped

Turn the dial counterclockwise.

■

When multiple papers are fed

Turn the dial clockwise.

Problem

Point to check

Action

Summary of Contents for MH 9350



























































































































































































































Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands

Riso MH 9350, User Manual

Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands