manualshive.com logo in svg

Ricoh IM C2000 Series, User Manual

Share
Download
Ricoh IM C2000 Series User Manual Download Page 84

Copying Onto Envelopes

To copy onto envelopes that are not usually used, set them in the bypass tray. If you copy onto
envelopes frequently, set them in the paper tray.

Copying Onto Envelopes in the Bypass Tray

• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press the

[Reset] key to cancel the setting.

1.

Press [Copy] on the Home screen.

2.

Set the envelope in the bypass tray with the copying side face down.

page 206 "Envelope Orientation and Recommended Status"
The "Bypass Tray Paper Settings" screen is displayed.

3.

Press [Change Setting].

When envelopes are set in the bypass tray, the type and size are not detected automatically.
Specify the type and size of the paper manually.

4.

Select [Envelope], and then proceed to the next screen.

DZC265

2. Copy

82

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands