manualshive.com logo in svg

Ricoh IM C2000 Series, User Manual, Page: 246 / 396

Share
Download
Ricoh IM C2000 Series User Manual Download Page 246

• page 238 "When a Message Appears While Using the Copy Function"

Messages Displayed When the Machine Cannot Connect to the Network

For details about your network environment, consult the network administrator.
The settings procedure is described using the [Classic] screen type of [Settings] as an example. When
you are using the [Standard] screen type, confirm the name of the setting items in the list below.
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide (Full
Version).

Message

Condition

Solution and reference

"Network communication
has failed. Cannot
access the SIP server.
Please check the address
setting of the SIP server
or the SIP server settings."

The SIP server could not
be accessed.

Specify the correct "SIP Server IP Address" in
[Settings]   [Machine Features Settings] 
[Fax Settings]   [Initial Settings] tab   [SIP
Settings].
See "Sending Documents by IP-Fax", User
Guide (Full Version).

"Network communication
has failed. Cannot
connect to the destination
normally because there is
no IP-FAX function
compatibility between
the destination and this
machine."

The destination device is
unable to connect with
the IP-Fax function of the
machine.

Sending a fax using the IP-Fax function is not
possible. Send the fax using the G3 line if
possible.

"Network communication
has failed. Cannot
register this machine to
SIP server. Please check
the address setting of the
SIP server or other
settings of the SIP server."

The SIP server rejected
the registration of the
user name.

Specify the correct "SIP Server IP Address" and
"SIP User Name" in [Settings]   [Machine
Features Settings]   [Fax Settings]   [Initial
Settings] tab   [SIP Settings].
See "Sending Documents by IP-Fax", User
Guide (Full Version).

9. Troubleshooting

244

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments