manualshive.com logo in svg

Ricoh IM C2000 Series, User Manual, Page: 103 / 396

Share
Download
Ricoh IM C2000 Series User Manual Download Page 103

4.

Select the [Notification of Results] check box.

DZX317

5.

To send a notification e-mail to a destination other than the sender, press [Notification of
Results] on the [Settings] screen, and then specify the destination of the e-mail.

6.

Configure the scan settings.

See "Sending a Fax at the Image Quality Suitable for the Original", User Guide (Full Version).

7.

After configuring the send settings, specify the destination on the fax screen, and send the
fax.

page 89 "Basic Procedure for Transmitting Faxes"
See "Basic Procedure for Sending Internet Faxes" and "Basic Procedure for Sending IP-Faxes",
User Guide (Full Version).

Confirming the Information in Web Image Monitor

In Web Image Monitor, you can view up to 1,000 of the latest total results of the transmission and
reception history.

1.

Log in to Web Image Monitor as the administrator.

See "Logging in to Web Image Monitor", User Guide (Full Version).

Viewing the Transmission Result of Sent Faxes

101

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments