Ricoh IM C2000 Series User Manual Download Page 27

Page: 27 / 396

Version 1.1

Application

Added Function

Reference

Settings

The following functions are
added:

• You can now switch

between different screen
types.

See "How to Use the Settings Screen", User
Guide (Full Version).

• You can now change the

type of notification sound
of the Copier function.

• Copy: Job Done

Sound

• Copy: Forgot

Original Sound

See "Sound", User Guide (Full Version).

• You can now specify the

sound to notify the user
when an original is left
unattended on the
machine (Scanner: Forgot
Original Sound).

Address Book

An address book management
function is added.

See "Management", User Guide (Full Version).

Confirming the Functions that Are Added in RICOH Always Current Technology

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Search results

Summary of Contents for IM C2000 Series

Reviews:

Ricoh IM C2000 Series, User Manual, Page: 27 / 396

Search results

Summary of Contents for IM C2000 Series

Reviews: