manualshive.com logo in svg

Ricoh IM C2000 Series, User Manual

Share
Download
Ricoh IM C2000 Series User Manual Download Page 307

Item

Specifications

Power consumption
(Complete system)

(mainly

Europe)

Maximum: 1850 W or less

• The complete system of the IM C3000/C3500 series consists of the main

unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT),
bridge unit, Booklet Finisher SR3270, fax unit, two extra G3 interface
unit, NFC card reader, and wireless LAN board.

• The complete system of the IM C4500/C5500/C6000 series consists of

the main unit, one-pass duplex scanning ADF, lower paper trays, internal
tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3290,
fax unit, two extra G3 interface unit, NFC card reader, wireless LAN
board, and file format converter.

• The complete system of the IM C2000/C2500 series consists of the main

unit, ARDF, lower paper trays, internal tray 2, bridge unit, Booklet
Finisher SR3270, fax unit, extra G3 interface unit, NFC card reader, and
wireless LAN board.

Power consumption
(Main unit only)

(mainly

Asia)

• IM C2000/C2500

Ready: 46.2 W
During printing: B&W: 416 W / Color: 465 W (IM C2000)
During printing: B&W: 452 W / Color: 497 W (IM C2500)
Maximum: 1850 W or less

• IM C3000/C3500

Ready: 47.6 W
During printing: B&W: 503 W / Color: 560 W (IM C3000)
During printing: B&W: 533 W / Color: 599 W (IM C3500)
Maximum: 1850 W or less

• IM C4500/6000

Ready: 59.0 W
During printing: B&W: 645 W / Color: 730 W (IM C4500)
During printing: B&W: 838 W / Color: 957 W (IM C6000)
Maximum: 1850 W or less

The power level when the main switch is turned off and the power cord is
plugged into an outlet: 1 W or less

List of Specifications

305

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands