manualshive.com logo in svg

Ricoh IM C2000 Series, User Manual, Page: 218 / 396

Share
Download
Ricoh IM C2000 Series User Manual Download Page 218

Replacing the Toner

Toner is almost depleted when the "Check you have a print cartridge replacement(s)." message is
displayed. Prepare a replacement print cartridge.
See "Contact Information", User Guide (Full Version).
See the video displayed on the control panel of the machine for the procedure to replace the toner.

• Replace the toner after the message prompting replacement is displayed on the control panel.
• The machine may become damaged if you use toner of a different type.
• Do not turn off the power of the machine when replacing the toner. If you turn off the power when

replenishing the toner, the specified settings are canceled, and printing will not resume afterwards.

• Store the toner in a dry environment away from direct sunlight and generally under the temperature

below 35°C.

• Keep the toner horizontal when storing it.
• After removing the toner cartridge from the machine, do not shake it while its opening is facing

downward. The remaining toner may spill out.

• Do not pull out and put back the toner cartridge repeatedly. The remaining toner may leak.
• Follow the procedure displayed on the screen to replenish the toner.

1.

Press [Watch Video].

DZC630

To display this screen again, press [Confirm] in the system message widget, or press [Check Status]
and then press [Check] under "Mach. Status" on the [Mach./Applic. Stat] tab.

8. Adding Paper and Toner

216

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments