Home
/
Ricoh
/
IM C2000 Series
/
User Manual

Ricoh IM C2000 Series, User Manual, Page: 185 / 396

Share

Page: 185 / 396

Ricoh IM C2000 Series User Manual Download Page 185

DZW137

6.

While pressing the release lever, adjust the side and end fences to the paper size.

Do not leave spaces between the paper and fences.

DZW138

To fix the end fence, engage the two projections of the stopper with the holes on the end fence,
and then tighten the fixing screw by rotating it 90 degrees clockwise with a coin or similar object.

• If you will not fix the end fence, put the stopper in the position as shown in the illustration, and

then rotate the fixing screw 90 degrees clockwise with a coin or similar object.

DZW184

7.

Push the tray in the original position carefully.

To return the completely pulled out tray to the original position, push the tray straight in. If the paper
tray is damaged, it may cause a paper jam. Also, if you push the tray forcibly, the side fence of the
tray may be moved.

Loading Paper into the Paper Tray

183

«
...
183
184
185
186
187
...
»

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments