Ricoh IM C2000 Series, User Manual, Page: 265 / 396

Message Cause Solution and reference
"Hardware Problem:
HDD" An error is
occurring on the
hard disk of the
machine. Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 11 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"Hardware Problem:
USB" An error has
occurred on the
USB interface.
"Hardware Problem:
Ethernet" An error has
occurred in the
Ethernet interface.
"Hardware Problem:
Wireless Card" An error has
occurred in the
Wireless LAN
board. Turn off the power of the machine, check that the
Wireless LAN board is correctly installed in the
machine, and then turn on the power.
page 11 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"HDD is full." The area reserved
for forms or fonts in
PostScript 3 is full. Delete a registered form or font that is no longer
necessary.
"HDD is full. (Auto)" An overflow error
occurred in the hard
disk while storing a
document printed
by Normal Print as
a Hold Print job by
the error job storing
function. • Reduce the size of the document to print.
• Erase documents that are no longer needed.
See "Deleting Documents Stored in the Machine"
and "Erasing Documents from Document Server",
User Guide (Full Version).
"I/O buffer
overflow." An overflow has
occurred in the
receive buffer. • Reduce the transmission data.
• Increase the value in [I/O Buffer] on the [Settings]
[Machine Features Settings] [Printer Settings]
[Host Interface] tab.
When a Message Appears While Using the Printer Function
263