Ricoh IM C2000 Series User Manual Download Page 163

Page: 163 / 396

When specifying the resolution

• Select the resolution to use for scanning the original. Image quality improves as the

resolution increases, but the size of the scanned data also increases.

• To ensure the quality of scanned data, [100 dpi] cannot be selected in the following

cases:

• [High Compression PDF] is specified in [PDF Type] under [File Type]

page 162 "Specifying the File Type or File Name When Scanning a Document"

• [OCR] is selected in [PDF Detailed Settings] under [File Type]

See "Scanning an Original as a PDF File with Embedded Text Data", User Guide
(Full Version).

To send the scanned document to an e-mail address, press [Sender] and then specify the
sender.

Specify the destination, and press [Start].

Scanning an Original with Suitable Quality and Density

161

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Search results

Summary of Contents for IM C2000 Series

Reviews:

Ricoh IM C2000 Series, User Manual, Page: 163 / 396

Search results

Summary of Contents for IM C2000 Series

Reviews: