R&S AFQ100A, Operating Manual

Page: 345 / 401

R&S AFQ100A AFQ Commands - Setup Section
1401.3084.32 6.84 E-3
MMEMory:RDIRectory <directory_name>
The command deletes the specified subdirectory in the specified directory. If no directory is
specified, the subdirectory with the specified name is deleted in the default directory.
The command triggers an event and therefore has no query form and no *RST value.
Example: MMEM:RDIR 'carrier'
'deletes the subdirectory 'carrier' in the current directory.
*RST value Resolution Options SCPI
- - Device-specific
MMEMory:STORe:STATe 4 ,<file_name>
This command stores the current instrument setting in the specified file.
The instrument settings must first be stored in an internal memory with the same number using the
common command *SAV (see the section
Introduction - Common Commands , on page 6.1).
The command triggers an event and therefore has no query form and no *RST value.
Example:
"
*SAV 4"
'stores the current instrument setting in an intermediate memory with number
4. This setting can be called using command
*RCL
and the associated
number of the memory, e.g.
*RCL 4
.
MMEM:STOR:STAT 4,'D:\USER\test1.savrcl'
'stores the current instrument setting with the
*SAV
command under memory
number
4
in the file
'test1.savrcl'
in the USER directory on the internal
hard disk.
*RST value Resolution Options SCPI
- - Compliant