R&S AFQ100A
General Instrument Settings
1401.3084.32 4.91
E-3
Update - Setup System
The
Update
dialog can be selected in the
System
section of the
Setup
menu.
After a firmware update it is occasionally required to update the PCI-FPGA also. This is enabled in the
Update
dialog.
At the first start of the new firmware a message appears during the boot process when a PCI-FPGA
update is required. The PCI-FPGA update starts by pressing the
PCI-FPGA
button.
NOTICE
Functions of the instrument may be impaired!
Disrupting the update of the PCI-FPGA may impair instrument functions.
The update of the PCI-FPGA
must not be cancelled
and the instrument
must not be
switched off
during this update.
