R&S AFQ100A
General Instrument Settings
1401.3084.32 4.100
E-3
USB Device
Enables/disables the USB interfaces. Any device connected to the
USB interface is not recognized by the instrument when the interface
is disabled.
The setting requires the entry of the security password and is only
accepted after the
Accept
button is pressed.
Remote-control commands:
n.a.
LAN Connection
Enables/disables the LAN interfaces. Any device connected to the
LAN interface is not recognized by the instrument when the interface
is disabled.
The setting requires the entry of the security password and is only
accepted after the
Accept
button is pressed.
Remote-control commands:
n.a.
Security Password
Enters the security password that is required to enable or disabled the
LAN or USB interface. Default is '123456'.
All settings are only accepted after the
Accept
button is pressed.
Remote-control commands:
n.a.
Accept - Security
Settings
Accepts a new entry or selection and changes the settings
accordingly.
Remote-control command: n.a.
Factory Preset - Setup Factory Preset
The
Factory Preset
dialog provides a function to reset the instrument's settings to their factory state.
This function is activated by pressing the
Execute Factory Preset
button.