R&S AFQ100A
AFQ Commands - Signal Generation
1401.3084.32 6.37
E-3
[SOURce:]TRIGger:OUTPut<[1]...4>:DELay:MAXimum?
The command queries the maximum marker delay for setting
:TRIGger:OUTPut:DELay:FIXed
ON
.. The command is a query only and therefore has no *RST value.
Example:
TRIG:OUTP:DEL:FIX ON
'restricts the marker signal delay setting range to the dynamic range.
TRIG:OUTP:DEL:MAX?
'queries the maximum of the dynamic range.
Response:
"4000"
'the maximum for the marker delay setting is 4000 samples.
*RST value
Resolution
Options
SCPI
-
-
Device-specific
[SOURce:]TRIGger:OUTPut<[1]...4>:DELay:MINimum?
The command queries the minimum marker delay for setting
:TRIGger:OUTPut:DELay:FIXed
ON
..
The command is a query only and therefore has no *RST value.
Example:
TRIG:OUTP:DEL:FIX ON
'restricts the marker signal delay setting range to the dynamic range.
TRIG:OUTP:DEL:MIN?
'queries the minimum of the dynamic range.
Response:
"0"
'the minimum for the marker delay setting is 0 samples.
*RST value
Resolution
Options
SCPI
-
-
Device-specific
[SOURce:]TRIGger:OUTPut<[1]...4>:LIST
The command defines the pattern of samples used to generate the marker signal in the setting
TRIGger:OUTPut:MODE LIST
for the selected marker output.
Example:
SOUR:TRIG:OUTP1:LIST "1-100:1;101:0;102-200:1"
'The signal starts with value 1 from position 1 (start index) to position 100 (end
index). By the sample position 101 the signal changes to 0 and during the
sample range positions 102 to 200 the signal is set to 1 again.
Alias remote-control command:
SOUR:MARK1:LIST "1-100:1;101:0;102-200:1"
*RST value
Resolution
Options
SCPI
UNCHanged -
Device-specific