R&S AFQ100A
Equalizer Block
1401.3084.32 4.51
E-3
Save As...
Opens the window
Create List File Which Name?
to save the table
under a new name see section
Note:
If a file is selected (marked) the file name is entered automatically
in the entry field
File name:
. Then the current data will overwrite
the data in the file.
Each table is saved to the hard disk as a separate file with the file
ending *.afg_mfg. The file name and the directory to which the file has
to be saved are user-selectable.
Remote-control command:
SOUR:EQU:MOD:SEL 'new_corr_MOD'
Save
Saves the edited table under its current name.
Remote-control command: n.a.
(The table is saved automatically after the values have been entered.)
Frequency, Gain,
Phase
Enters the frequency, gain and phase values for the equalizer data
tables. The charts in the I, Q and modulator window display the curves
generated from these data tables.
The selected modulator's frequency entry mode applies to its data
table.
Remote-control commands:
SOUR:EQU:MOD:FREQ 10000,20000,30000
SOUR:EQU:MOD:GAIN 0,-1,-2
SOUR:EQU:MOD:PHAS 0,45,90
