R&S AFQ100A
Manual Remote Control via an External Controller
1401.3078.62 1.41
E-3
Install and Enable VNC Connection on R&S AFQ
The
Ultr@VNC
program is available on the Internet as a free-of-charge download. Following the
instructions on the Internet, it can be copied onto the R&S AFQ.
1. Download the program from the internet and copy it to a directory that can be accessed by the
R&S AFQ.
2. Switch off the instrument.
3. Connect a mouse, a keyboard and an external monitor.
4. Switch on the instrument.
5. Shut down firmware using the Alt-F4 key combination.
6. Start installation by double-clicking the setup file (
.exe / whereas 18
denotes the version number).
The setup wizard leads through the installation. In the following only those panels are described in
which defined settings are required for the modulation generator.
a) Select installation of all components