R&S AFQ100A
General Instrument Settings
1401.3084.32
4.93
E-3
Diagnostic - Setup Test
The
Diagnostic
dialog can be selected in the
Test
section of the
Setup
menu.
The
Diagnostic
dialog provides access to the internal diagnosis facilities of the instrument.
The
Test Point
section provides access to the test points available in the instrument except for the
analog output board (see below). When activated, the voltage of the selected test point is measured
and displayed. A detailed description of the test points can be found in chapter 3 of the
service manual
.
The
Analog Output Board Test Point
section provides access to the test points on the analog output
board.
In the
Fan Control
section the fan speed is selected.
State - Test Point
Activates the measurement of the voltage at the selected test point.
Remote-control command:
DIAG:MEAS:POIN? 'DIAG_IQOP3_LCM_CAL_I'
Response:
2
