5.
Support the I/O port assembly with one hand and install all five mounting
screws (Figure 9-13).
6.
Plug the I/O port ribbon cable into the IOPORT connector on the PCBA
(Figure 2-8).
7.
Gently press the Call switch button back onto the Call switch.
8.
If you removed a Side Panel, reinstall it (Section 7.4.4), then reinstall the top
Panel (Section 7.4.2).
9.4.2.4
Disabling the Master Security Lock
Follow the instructions in Section 5.2 to disable the Master Security Lock.
9.4.2.5
Entering the Password
Follow the instructions in Sections 5.3.1 to enter the
Update
password.
9.4.2.6
Editing the I/O Port Value
NOTE
If the TLS is restricted, it may not be possible to change the I/O port value in the
Configu-
ration\Handler\Mechanics
menu. See Section 5.1 for details about restricted units.
1.
Press the MENU key to display the
Top Menu
. The pointer in the left margin of
the LCD should be pointing to
Configuration.
2.
Press the Enter key to enter the
Configuration
menu.
3.
Press the Enter key to enter the
Configuration\Advanced
menu.
4.
Press the Enter key to enter the
Configuration\Advanced\Changer
menu.
5.
Press the (DOWN) key repeatedly to move the pointer to
Mechanics
.
6.
Press the Enter key to enter the
Configuration\Advanced\Changer\
Mechanics
menu.
7.
Use the (DOWN) key to move the pointer to
I/O Port
.
8.
Open the cabinet door to defeat the DOOR security lock.
9.
Press the Enter key to begin editing the
I/O Port
value.
10.
Press the (UP) or (DOWN) key to change the
I/O Port
value from
NONE
to
A
.
11.
Close the cabinet door.
12.
Press the MENU key to return to the
Top Menu
.
501380 Rev. B
TLS
Expansions
9-19