7.19 Q-Link
P/N 501657-01-9
Tools Required:
•
Number 2 Phillips Screwdriver
Q-Link
Mounting
Screws
(6)
Figure 7-41 Q-Link on Rear of TLS
7.19.1 Q-Link Removal
1.
Turn off the TLS power and remove the power cord.
2.
Use a number 2 Phillips screwdriver to remove all six Q-Link panels mounting
screws (Figure 7-41), then move the panel backwards to access the cables.
3.
Disconnect the AUPWR cable from the POWER connector on the Q-Link PCBA
as shown in Figure 7-42.
4.
Disconnect the SERIAL ribbon cable from the SERIAL connector on the Q-Link
PCBA as shown in Figure 7-42.
501380 Rev. B
Field–Replaceable Units (FRUs)
7-63
