•
Checksum:
This is the checksum value of the current firmware. (It takes a second to calcu-
late this value).
4.6 Maintenance\Display Stats. Status Screen
M.....Display Stats.
Aborts: dddddddddd
DoorOpn:dddddddddd
Exchang:dddddddddd
Filter: dddddddddd
Grips: dddddddddd
I Calls:dddddddddd
I Moves:dddddddddd
I Steps:dddddddddd
Minutes:dddddddddd
Moves: dddddddddd
Picks: dddddddddd
Places: dddddddddd
PowerOn:dddddddddd
Resets: dddddddddd
S Cmnds:dddddddddd
X Moves:dddddddddd
X Steps:dddddddddd
Y Moves:dddddddddd
Y Steps:dddddddddd
Z Moves:dddddddddd
Z Steps:dddddddddd
The Display Statistics status screen displays a summary of events that have occurred
between the time the TLS was built and the current time. All values are decimal
counts of the number of times an event has occurred. Displayed values include:
•
Aborts
This value is the number of times that a Handler movement has been aborted.
The most frequent cause for Handler aborts is opening the Front Panel/Door
without using the control panel.
•
DoorOpn
This value is the number of times that the front door has been opened.
•
Exchang
This value is the number of cartridge exchanges that have been performed, in-
cluding exchanges executed by SCSI command and exchanges executed by op-
erator command via the menu system.
•
Filter
This value is the number of minutes since the air filter was last changed.
•
Grips
This value is the number of times that the cartridge Gripper solenoid has been
actuated.
•
I Calls
This value is the number of times that the CALL key has been pressed.
501380 Rev. B
Maintenance
Menu
4-7
