9.
TLS Expansions
DANGER
TO AVOID THE RISK OF PERSONAL INJURY:
TURN OFF ALL POWER TO THE TAPE LIBRARY SYSTEM, THEN REMOVE THE
POWER CORD, BEFORE ATTEMPTING ANY OF THE PROCEDURES IN THIS
CHAPTER.
NEVER OPERATE THE LIBRARY WHILE THE CABINET DOOR IS OPEN, OR WITH
THE TOP PANEL OR SIDE PANELS REMOVED.
GEFAHR
UM VERIETZUNGEN ZU VERHINDEM:
SCHALTEN SIE ALLE STROMSCHALTER AN DER TLS AUS UND ENTFERNEN SIE
DAS STROMKABEL, BEVOR SIE MIT DER SERVICE-ARBEIT BEGINNEN.
BENUTZEN SIE DIE TLS NIE WENN DIE TUERE OFFEN IST, ODER DIE DECK-,
BZW. SEITENPLATTE ENTFERNT SIND.
9.1 Introduction
This chapter contains installation instructions for each TLS expansion kit. To replace
an existing FRU (Field-Replaceable Unit), follow the instructions in Chapter 7.
A number of expansion kits are available from Qualstar. Some expansion kits are
used to increase the cartridge capacity of some TLS models, while other expansion
kits are used to add a Barcode Reader (Section 9.3) to any TLS model. Installing or
removing an expansion kit changes the configuration of a unit. Therefore, after an ex-
pansion kit is installed, the unit must be reconfigured and, in some cases, recali-
brated.
501380 Rev. B
TLS
Expansions
9-1
