9.2 Model Expansions
The capacity expansion kits are listed in Figure 9-1. Each kit should take less than 30
minutes to install.
Model Upgrade
Expansion Kit P/N
Capacity Increase
Section Page
Model 4212 to 4222
500829-05-6
10 to 20
Cartridges 9.2.1.1
Model 4440 to 4480
500830-04-7
40 to 80
Cartridges 9.2.1.2
Model 4660 to 46120
500831-02-9
60 to 120 Cartridges 9.2.1.3
Figure 9-1 Available Model Expansion Kits
Installing an expansion kit is a five–step procedure:
1.
Install the new hardware.
2.
Enter
Update
for the password in the Private menu. (Reconfiguring the TLS
model number and recalibrating the TLS are password-protected procedures.)
3.
Reconfigure the Library's model number to reflect the hardware changes.
4.
Recalibrate the Library.
5.
Clear the password (
Update
) to prevent unauthorized access to the Private
menu.
9.2.1 Installing a Model Expansion Kit
This procedure requires one expansion kit (described in Figure 9-1), plus a number 2
Phillips screwdriver to install the hardware.
Locking Tabs Mechanism
Locking Tabs Magazine
Qualstar
P/N 501110-02-1
Figure 9-2 8mm Magazine Mechanism
9-2 TLS
Expansions
501380 Rev. B
