5.4.6 The Private\Configuration Menu
P......Configuration
.Defaults
Demonstration :YES
s
.Restrictions
.SCSI
5.4.6.1 Demonstrations
This menu allows for the
Operation\Demonstrations
menu to be hidden.
YES
The
Operation\Demonstrations
menu is visible and allows
for the selection of Feature List or Random Moves. The Feature
List item is used to display messages about TLS features. The
Random Moves causes the changer to make continuous random
cartridge moves.
NO
The
Operation\Demonstrations
menu is hidden.
5.4.7 The Private\Defaults Menu
Private.....Defaults
LCD Line 1:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 2:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 3:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 4:DEFAULT
1-10: ??????????
11-20: ??????????
SCSI Vndr:????????
SCSI Prod:????????
????????
SCSI Revision:????
CLEAR
The items in this menu are used to create
custom default data
for various menu sys-
tem items.
Example 1:
The default text used on line 1 of the main display for a TLS-4210 is
Qualstar
TLS-4210
. However, an operator can enter custom data (e.g., different
text) for the main display line 1 over the SCSI bus, or by using the
Configuration\Advanced\Control Panel\Display
menu. If either of
these methods is used, and the operator then executes the Configuration menu’s
SET
TO
DEFAULTS
command, the custom text data is lost and the system’s default
text (
Qualstar
TLS-4210
) is displayed again.
Example 2:
The
Private\Defaults\LCD
Line
1
menu item, and its sub items
1-10
and
11-20
, can also be used to change the text used on line 1 of the main dis-
play.
Unlike Example 1
, text data entered in the
Private\Defaults
menu be-
comes the new system default data. Therefore, the custom data entered in this menu
5-14
The Private Menu
501380 Rev. B
