Promise Technology VTrak D5000 Series Product Manual Download Page 82

Page: 82 / 245

Deleting a LUN Map

Deleting a LUN map prevents the initiator from accessing the LUN while LUN masking is enabled.

delete a LUN map:

Click the

Volume

tab.

Click on

LUN Mapping & Masking

The list of LUN maps appears.

3. Click to select the LUN map you want, then click the

Gear

icon, and select the

Delete

option

4. In the Confirmation box, type the word “confirm” in the field provided and click the

Confirm

button.

Enabling and Disabling LUN Masking

Disabling LUN masking allows all initiators to access all LUNs in your data storage. However, disabling LUN

masking does not delete existing LUN maps.

These actions require

Administrator

Super User

privileges.

enable or disable LUN masking:

Click the

Volume

tab.

Click on

LUN Mapping & Masking

Click on the

Enable LUN Masking

slider to toggle off (disable) or on (enable) LUN masking.

LUN Mapping & Masking

Promise

Technology

Management with WebPAM PROe

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands