manualshive.com logo in svg

Promise Technology VTrak D5000 Series, Product Manual

Share
Download
Promise Technology VTrak D5000 Series Product Manual Download Page 189

net

Usage

net [-a <action>] [-t <type>] [-f <protocol family>] [-c <ctrl ID>] [-p <portid>] [-s “<list of settings>”] [-m] [-v]

net -a mod -t port -s “<list of settings>”

net -a mod -t portal [-f <protocol family>] -s “<list of settings>”

net -a mod -t portal -m -c <ctrl ID> [-f <protocol family>] -s “<list of settings>”

net -a enable -t port

net -a enable -t portal [-m] [-c <ctrl ID>] -f <protocol family>

Summary

Net is used to display the TCP/IP specific information for the management port and portal.

In addition to displaying IP address and subnet mask, changes to DHCP and DNS settings can be changed. Most 

often this command will be used during initial setup to either setup a static IP address or to display what DHCP 

assigned IP address the enclosure is using.

Options

-a <action>          Which action to perform.

list               

(Default) Displays a list of IP configurations.

mod                

To modify current network settings.

enable             

To enable IPv4/IPv6 for portal type. To enable IO support for port type.

disable            

To disable IPv4/IPv6for portal type. To disable IO support for port type.

-t <type>

port

portal             

(Defaults)

-m                    

Physical portal IP configurations. 

 

This option must be specified in maintenance mode

180

Promise 

Technology 

   

   

 

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands