manualshive.com logo in svg

Promise Technology VTrak D5000 Series, Product Manual

Share
Download
Promise Technology VTrak D5000 Series Product Manual Download Page 123

Email Service

Email service enables the RAID subsystem to send you Email messages about events and status changes. By 

default, Email service is set to Automatic.

Stopping Email Service

To stop the Email service:

1. 

Click the 

Administration

 tab.

2. 

Click the 

Service

 icon.

3.  Click the gear icon for Email service and select the 

Stop

 

option.

4. 

Click the 

Confirm

 button.

To start the Email service after stopping it:

1. 

Click the 

Administration

 tab.

2. 

 Click the 

Services

 icon.

3.  Click the gear icon for Email service and select the 

Start

 

option.

Restarting Email Service

To restart the Email service:

1. 

Click the 

Administration

 tab.

2. 

Click the 

Service

 icon.

3.  Click the gear icon for Email service and select the 

Restart

 

option.

114

Promise 

Technology 

   

   

 

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands