manualshive.com logo in svg

Promise Technology VTrak D5000 Series, Product Manual

Share
Download
Promise Technology VTrak D5000 Series Product Manual Download Page 64

•  Device tab

•  Device Overview (Device status and information summary, NTP settings, 

Date and time setting, Subsystem restart and shutdown)

•  Device View (Front View, Back View, Topology)
•  Component List (Enclosure, Controller, Battery, Buzzer, summary and configuration) 
•  Physical Drive (Physical drive information summary, Physical drive settings)
•  UPS (summary and configuration) 
•  Initiator (summary delete, add initiator) 
•  Network Management (Virtual and physical port summary and configuration) 
•  FC Management (Information and configuration for FC including: Node, 

Port, Statistics, Logged in devices, Devices on fabric, SFP)

•  iSCSI Management (Information and configuration for iSCSI including: 

Target, Port, Session, Portal, iSNS, Trunk, Chap, Logged in devices) 

•  Administration tab

•  Events
•  Management User
•  Service
•  Performance Monitor
•  Image Version
•  Firmware Update
•  Background Activity
•  Restore Factory Default
•  Import/Export
•  Product Registration
•  Setup Wizard

•  NAS Share tab

•  Create New NAS Share
•  NAS Share List
•  Protocol
•  Periodic Snapshot

•  NAS Account tab

•  NAS User (Create, delete, modify users)
•  NAS Group
• 

Domain

55

Promise 

Technology 

    

 

  

Management  with  WebPAM  PROe        

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands