Promise Technology VTrak D5000 Series Product Manual Download Page 184

Page: 184 / 245

Examples

isns

isns -a mod -t mgmt -s “isns=enable,serverip=10.0.10.90”

Options

-a <action>

Which action to perform.

list

(Default) Displays a summary of iSNS settings.

mod

Allows the user to change iSNS settings

-t <port type>

The type of port to iSNS through. If -t is not specified, the default value is

Mgmt port.

portal

iSCSI portal. For iSCSI host interface product only.

mgmt

Management port. For embedded only.

-g <portal id>

Portal ID

-s “<option>=<value>”

Used to specify what options to change.

isns =

Enable and disable iSNS.

enable

disable

serverip =

iSNS server ip address.

serverport =

iSNS server port number. The default value is 3205.

1..65535

175

Promise

Technology

Managing with CLI

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands