![background image](http://html.mh-extra.com/html/promise-technology/vtrak-d5000-series/vtrak-d5000-series_product-manual_1617263144.webp)
When the update is completed a message tells you to reboot the subsystem,
7.
Click the
OK
button.
• If you chose the Disruptive Flash Method, the RAID subsystem
and JBOD expansion units automatically restart.
• If you chose the Non-Disruptive Flash Method, the system automatically
flashes and restarts the RAID controllers one at a time.
Automatic Restart
If you did NOT check the NDIU box, the RAID subsystem and JBOD expansion units automatically restart. That
action temporarily disrupts I/O operations and drops your WebPAM PROe connection.
To reestablish your WebPAM PROe connection:
1. Wait no less than two minutes.
2.
Click
Logout
in the WebPAM PROe Header, then log in again.
If you cannot log in, wait 30 seconds and try again.
3. In your browser, click Logout in the WebPAM PROe Header, then log in again.
If you cannot log in immediately, wait 30 seconds and try again.
135
Promise
Technology
Management with WebPAM PROe