Promise Technology VTrak D5000 Series Product Manual Download Page 63

Page: 63 / 245

Perusing the Interface

The

WebPAM PROe interface consists of a header and four tabs, each with specific functions.

• Header

Top right corner of the window:

•  Event Notification
•  Save Service Report – Saves a detailed report to your Host PC
•  Name of logged-in user
•  Logout – Exits WebPAM PROe

Use the pulldown menu (small telephone icon) to see these links:

•  Get Help – Accesses the Help Welcome screen
•  About – Information about WebPAM PROe
•  Contact Us – Technical support contact information

• Discovery tab (located in bottom left corner of WebPAM PROe window)

• Displays other PROMISE RAID systems on your network
• Enables direct login to other PROMISE RAID systems

The main information and configuration menus are as follows:

•

Dashboard tab

•  Subsystem Health quick summary
•  Capacity Utilization summary
•  Performance graphic summary

• Pool tab

•  Create New Pool button (Setup Wizard)
•  Pool List (including Extend or Delete existing pool)
•  Cache (SSD cache configuration)
•  Spare Drive (including create or delete spare drive)

• Volume tab

•  Create New Volume button (Setup Wizard)
•  Volume List (including Delete, Export, and Un-export)
•  LUN Mapping & Masking
•  Periodic Snapshot

List continues on next

page

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands