manualshive.com logo in svg

Promise Technology VTrak D5000 Series, Product Manual

Share
Download
Promise Technology VTrak D5000 Series Product Manual Download Page 224

ssh settings   

port=            

Port number for ssh daemon.

sessiontimeout=  

Session time out in minutes. Maximum 1440.

maxconnection=   

Max number of ssh client connection. Maximum 4.

   snmp settings

port=            

IPv4 Port number.

port6=           

IPv6 Port number.

sysname=         

System name string.

syslocation=     

System location string.

syscontact=      

System contact information string.

readcommunity=   

IPv4 Read community name.

readcommunity6=  

IPv6 Read community name.

-p “<option>=<value>” 

Used to specify trap sinks for snmp or public key for ssh.

 

Multiple -p option can be entered with -a add option for trap sink.

trapsinkserver=      

Trap sink IP address or trap sink server name. For snmp only.

trapfilter=      

Trap filter level. It implies the level and above. For snmp only.

info          

warning       

minor         

major         

critical      

fatal         

filename=        

Ssh public key file name. For ssh only.

server=          

TFTP server IP address or server name. For ssh only.

comment=         

Ssh public key comment. For ssh only.

215

Promise 

Technology 

    

 

  

Managing with CLI

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands