Promise Technology VTrak D5000 Series Product Manual Download Page 159

Page: 159 / 245

Summary

The clone command allow user to view, add, delete a clone.

Can export or uexport a clone if it’s type is volume. Can mount or unmount a clone if it’s type is nasshare.

Options

-a <action>

Which action to perform.

list

(Default) Displays the current active Clone(s) and their status(es).

add

Add a clone based on snapshot.

mod

Modify clone setting.

del

Delete a clone.

export

Export a clone.For volume type only.

unexport

Unexport a clone.For volume type only.

mount

Mount a clone.For nasshare type only.

unmount

Unmount a clone.For nasshare type only.

-i <clone id>

Specify clone id.

-d <snapshot id> S

pecify snapshot id.

-s “<option>=<value>”

name=

Name to clone, accept double-bytes.

-f

Force delete the clone.

-v

Verbose mode. Used with -a list.

-y

Enable non-interactive mode.

150

Promise

Technology

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands