manualshive.com logo in svg

Promise Technology VTrak D5000 Series, Product Manual

Share
Download
Promise Technology VTrak D5000 Series Product Manual Download Page 206

stripe=            

Used to specify the stripe size of the logical drive. 

 

The possible parameters are 64KB, 128KB, 256KB, 512KB, and 1MB.  

 

If not specified, the default 64K will be used. 

 

 

 

 

Only valid for add action

sector=            

Used to specify the desirable sector size of the logical drive. The possible  

 

parameters are 512B, 1KB, 2KB, and 4KB. 

 

 

 

 

It must not be greater than the Stripe size.  

 

 

 

 

It will be auto-adjusted not to exceed the max supported sector size of the  

 

controller, please see controller information.  

 

If not specified, the default 512 will be used.

 

 

Only valid for add action

Axle=              

RAID 50, 3 to 32 drives per axle.   

 

 

 

 

 

RAID 60, 4 to 32 drives per axle. 

 

Valid for add action with physical drive type or expand action on the pool  

 

created by physicsl drive with new drives is physical drive too.

ctrlid=          

Used to specify which controller the pool is preferred for LUN affinity. Valid  

 

value is 1 or 2. If value is not specified, LUN affinity will be auto balanced.  

 

Valid for add or mod action.

all pools:

capthreshold=     

(75..95 ) Pool capacity nearly full warning threshold. 

 

Valid for add or mod action.

-f                    

Force delete the pool.

-v                    

Verbose mode. Used with -a list action.

-y                    

Enable non-interactive mode.

197

Promise 

Technology 

    

 

  

Managing with CLI

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands