Promise Technology VTrak D5000 Series Product Manual Download Page 105

Page: 105 / 245

Making Maintenance Mode Port Settings

The IP settings of management ports are also configured in Network Management.

To make physical management port settings:

Click the

Device

tab.

Click the

Management Portal

icon.

Under

Static IP

, click on the gear icon and choose the

Modify

option.

4. In the new menu, make the following settings are needed:

•

Check the

Enable DHCP

box to enable a DHCP server to make

your network settings. DHCP is currently supported in IPv4 only.

Note that you will have the option to enable Auto DNS.

• For manual network settings, type the RAID subsystem’s IP address,

subnet mask and gateway IP address into the fields provided.

• You can choose to

Enable Physical IP

Click the

Save

button.

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands