Promise Technology VTrak D5000 Series Product Manual Download Page 197

Page: 197 / 245

Examples

perfstats -a start

perfstats -a list -t all

perfstats

Usage

perfstats -a start

perfstats -a list [-t <type>]

Summary

The perfstats command will display performance statistics of controllers, disk pools, volumes, physical drives and

ports.

Options

-a <action>

Which action to perform.

list

(Default) Displays the performance statistics.

start

Starts the performance statistics.

-t <type>

Used to specify the device type. Used with -a list.

ctrl

controller

phydrv

physical drive

port

all

Includes all the above options

188

Promise

Technology

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands