Promise Technology VTrak D5000 Series Product Manual Download Page 205

Page: 205 / 245

-t <Drive type>

Specify the type of drive.

Physicsl drive

External drive

-p <PD ID list>

Used to specify which physical drives are to be used in an pool. Used in

conjunction with -a add. PD IDs can be used singly or separated by a

comma. Additionally a sequential group of physical drives can be specified

by placing a ~ between numbers such as 1~6. This will include physical

drives 1,2,3,4,5,6.

-s “<option>=<value>”

Used to specify settings for an pool. This is used when creating (add) or

modifying (mod) an pool. These options are separated by commas.

name=

A user specified name used to identify an pool.

It can be up to 32 characters long, containing alpha-numeric characters,

blank spaces and underscores. The beginning and ending blank spaces

will be discarded. Valid for add or mod action

raid=

Used to specify the RAID level of the pool Only valid for add action with

physical drive type.

Striping.

Mirroring on two drives.

Parity, requiring 3 or more drives.

Mirroring on even number of drives.

Striping on multiple RAID 5, requiring 6 or more drives.

Allow two drive failure, requiring 4 or more drives.

Striping on multiple RAID 6, requiring 8 or more drives.

196

Promise

Technology

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands