![background image](http://html.mh-extra.com/html/promise-technology/vtrak-d5000-series/vtrak-d5000-series_product-manual_1617263101.webp)
Making UPS Settings
These settings control how the VTrak D5000 subsystem detects the UPS unit and responds to data reported
by the UPS unit.
To make
UPS settings:
1.
Click the
Device
tab.
2.
Click the
UPS
icon.
3.
Click the
UPS Settings
button.
4. Perform the following actions as required:
• Choose a Detection Setting from the drop-down menu:
* Auto
– Default. If a UPS is detected when the subsystem boots, the setting
changes to Enable.
* Enable
– Monitors UPS. Reports warnings and logs events.
* Disable
– Does not monitor UPS.
• Type values into the Threshold fields:
* Running Time Remaining Threshold
– Actual time below this value resets
adaptive writeback cache to writethrough. Default is 5 minutes, range is 3-20
minutes.
• For UPS units with network cards, type the IP addresses or
DNS names in fields UPS 1 and UPS 2.
See Note 2
.
5. Press
Submit
to save your settings.
Note 1:
VTrak D5000 supports multiple UPS units using network or USB connections, but not a
combination of both methods.
Note 2:
To specify UPS units by DNS names, ask your IT administrator to add the DNS names to
the DNS server, before you make UPS settings. DNS settings must first be configured in
Network
Management
using the
Global Settings
menu.
92
Promise
Technology
VTrak D5000 Series