![background image](http://html.mh-extra.com/html/promise-technology/vtrak-d5000-series/vtrak-d5000-series_product-manual_1617263190.webp)
-c <ctrl ID>
Specifies the controller ID. When the action is to modify setting and -c is
not specified, the value is default to be the current controller id.
-p <port ID>
Specifies the port ID.
-f <protocol family>
To specify which protocol family will be modified, enabled or disabled.
ipv4
(Default)IPv4.
ipv6
IPv6.
-y
Execute command in non-interactive mode.
Only valid for disable, mod action.
-s “<option>=<value>”
List the various settings for the MGMT ports and portals.
These options are comma separated.
Works only with modify command.
The following settings apply to portal. Requires -t portal or -t portal -m and -c <controllerr id> options.
ip=
Specify the primary IP address.
ipmask=
Specify the primary subnet mask.
gateway=
Specify the gateway.
dhcp=
Enable or disable DHCP support.
Currently only supported for ipv4.
enable
disable
181
Promise
Technology
Managing with CLI