Promise Technology VTrak D5000 Series Product Manual Download Page 37

Page: 37 / 245

drive mounting screws

2.5” drive carrier with HDD, ‘left’ side with HDD undercarriage exposed

2.5” drive carrier with HDD installed, front view

drive

mounting

screws

4. Position the drive in the carrier so the mounting holes line up.

5. Insert the screws through the proper holes in the carrier and into the drive or adapter.

•

Install four screws per drive.

•

Snug each screw. Be careful not to over tighten.

With the drive carrier handle in open position, gently slide the drive carrier into the enclosure. The drive

carrier should be oriented so the the “top” of the 2.5” HDD is on the right, and the “bottom” of the HDD is

on the left. The LED indicators will be at the top.

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands