Promise Technology VTrak D5000 Series Product Manual Download Page 210

Page: 210 / 245

Examples

rb -a start -l 0 -s 2 -p 10

rb -a stop -l 0 -s 2

Usage

rb [-a <action>] [-l <PoolId>] [-s <SeqNo>]

rb -a start -l <PoolId> -s <SeqNo> -p <PdId>

rb -a stop -l <PoolId> -s <SeqNo>

rb -a pause -l <PoolId> -s <SeqNo>

rb -a resume -l <PoolId> -s <SeqNo>

Summary

This command allows the user to check on the progress of a running or paused Rebuild as well as to check on

the progress of a running Rebuild..

Options

-a <action>

Which action to perform.

list

(Default) Displays the current active and their status(es).

start

Starts a manual rebuild.

stop

Stops a rebuild.

pause

Pauses a rebuild.

resume

Resumes a paused rebuild.

-l <Pool ID>

Specifies which Pool to perform rebuild action on.

-s <sequence Num>

Specifies the sequence number of the physical drive that was marked

offline and will used for the rebuild.

-p <PD ID>

Identifies the physical drive ID that will be used in the rebuild process.

201

Promise

Technology

Managing with CLI

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands