Promise Technology VTrak D5000 Series Product Manual Download Page 88

Page: 88 / 245

eVIce

Use the Device menus to monitor subsystem status and make settings changes to subsystem components,

drives, network settings, etc.

Viewing Subsystem Information

To view subsystem information, click the

Device menu

tab.

The list of subsystems and host controllers is displayed in

Device Overview

. Subsystem information includes:

• Alias, if assigned

• Model

• WWN – World Wide Name

• Serial number

• Redundancy status

• Redundancy Type

• System date and time

•

Time Zone

•

Vendor

Device Overview

Promise

Technology

Management with WebPAM PROe

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands