Home
/
Promise Technology
/
VTrak D5000 Series
/
Product Manual

Promise Technology VTrak D5000 Series, Product Manual, Page: 98 / 245

Share

Page: 98 / 245

Promise Technology VTrak D5000 Series Product Manual Download Page 98

Viewing Physical Drive Information

To view physical drive information:

1.

Click the

Device

tab.

2.

Click the

Physical Drive

icon. Information for each drive is listed in the menu.

Physical drive information includes:

•  Physical Drive ID – ID number of the physical drive
•  Operational Status – OK is normal, Stale, PFA, Dead
•  Model Number– Make and model of the drive
•  Drive Interface Type – SATA or SAS
•  Location – Enclosure number and slot number
•  Configuration Status – Pool number or spare number
•  Physical Capacity – Total capacity in TB

Managing Physical Drives

89

Promise

Technology

Management with WebPAM PROe

«
...
96
97
98
99
100
...
»

Summary of Contents for VTrak D5000 Series






















































































































































































































































Reviews:

No comments