Promise Technology VTrak D5000 Series Product Manual Download Page 198

Page: 198 / 245

phydrv

Usage

phydrv [-a <action>] [-p <PdId>] [-c <Pd count>] [-v]

phydrv -a mod -p <PdId> -s “<list of settings>”

phydrv -a locate -p <PdId>

phydrv -a online -p <PdId>

phydrv -a offline -p <PdId>

phydrv -a clear -t <condition type> -p <PdId>

Summary

The phydrv command displays physical drive information, changes physical drive settings, locates individual

drives, and forces a drive to an online or offline state.

Note:

Forcing a drive online should only be done in extreme conditions. It will almost always cause data

corruption.

Options

-a <action>

Which action to perform.

list

(Default) Displays all physical drives in the enclosure, their make, model

number, and array they belong to. Their status is also shown.

mod

Allows the user to make modifications to the physical drive settings.

locate

Allows the user to flash an LED for physically identifying the location of

the

drive.

online

Allows the user to force a drive ONLINE from the OFFLINE state. It is

highly recommended not to do this except in extreme conditions.

Performing this action will in almost all cases cause data corruption.

offline

Allows the user to force a drive offline if it is misbehaving.

clear

Allows the user to clear a drive’s past condition.

-p <PD ID>

Specifies the physical drive ID.

189

Promise

Technology

Managing with CLI

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands