Promise Technology VessRAID 1720i Product Manual Download

Page: 47 / 354

Chapter 3: VessRAID Setup

Setting up with the CLU

At the administrator@cli> prompt, type menu and press Enter.

The CLU main menu appears.

Figure 2. CLU main menu

With Quick Setup highlighted, press Enter.

The first Quick Setup screen enables you to make Date and Time settings.

Setting system date and time

To make date and time settings:

Press the arrow keys to highlight System Date.

Press the backspace key to erase the current date.

Type the new date.

Follow the same procedure to set the System Time.

Press Ctrl-A to save these settings and move to the Management Port
configuration screen.

Making Manual IP Settings

To make Management Port and iSCSI Port settings manually:

Press the arrow keys to highlight IP Address.

Summary of Contents for VessRAID 1720i



































































































































































































































































































































































Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands

Promise Technology VessRAID 1720i, Product Manual

Search results

Summary of Contents for VessRAID 1720i

Reviews:

Related manuals for VessRAID 1720i

Brands by name

Popular brands